View 628MCL451_4167820.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

baTTerydriveN,FTP-608series 2"highsPeedTherMaLPriNTer
FTP-628MCL401/451
n Overview
The FTP-628 MCL Series are battery driven high-speed printers with a 2-inch paper width equivalent. The FTP-628 MCL Series can be used for a variety of applications, such as portable terminals, POS, banking terminals, and measurement and medical equipment.
n highLighTs
* Ultralowprofile Height 2.8 mm, width 8.2 mm, depth 42.2 mm * Highspeedprinting It can print at 60 mm/s (480 dotlines/s) maximum by using Fujitsu's unique head drive control. * AutoCutter Full cut type and partial cut type printers are available by user selection. * Easypapersetting Our unique platen release mechanism allows a wide paper route even if the printer is ultra-compact, so paper can be easily inserted. Conventional auto loading is also available. * Multifunctionaldie-castform Wide operating temperature range, long continuous printing, high ESD absorbtion and discharge of static electricity vibration and shock resistant. * RoHScompliant FTP-628DSL49R FTP-628MCL40
FTP-628MCL401/451
n ParTNuMbers
Name Printer mechanism with cutter Printer mechanism without cutter LSI for driving Interface board for Mechanism/Cutter Interface cable Power cables Cutter supported
Part Number FTP-628MCL40 (Easy Load Model) FTP-628MCL45 (Easy Load Model with platen bracket + lock lever) FTP-629CU45R FTP-628DSL49R Parallel (Centronics) / Serial (RS-232C)
Parallel (Centronics) FTP-628Y202 Serial (RS-232C) Head, motor, logic FTP-628Y302 FTP-628Y402
n sPeCiFiCaTiONs
Item Part number Printing method Dot structure Dot pitch (Horizontal) Dot pitch (Vertical) Effective printing area Number of columns Paper width Paper thickness Printing Speed Character types FTP-628MCL40 Thermal-line dot method 384 dots/line 0.25 mm (8 dots/mm)--Dot density 0.25 mm (8 dots/mm)--Line feed pitch 48 mm ANK 32 columns/line (maximum 2 x 24 dot font) 58 mm 60 to 00 m (some paper in this range may not be used because of paper characteristics) Maximum 60mm/sec. (480 dot line/sec.) at 8.5V Alphanumeric, kana: International characters: JIS Kanji (Kanji CG loaded board): 59 types 95 types about 6800 types Specifications
Character, dimensions (WxH), number of columns
2 x 24 dots, (.5 x 3.0 mm), 32 columns: ANK 24 x 24 dots, (3.0 x 3.0 mm), 6 columns: ANK 8 x 6 dots, (.0 x 2.0 mm), 48 columns: ANK 6 x 6 dots, (2.0 x 2.0 mm), 24 columns: ANK
2
FTP-628MCL401/451
n sPeCiFiCaTiONs
Item Interface For print head Power supply For motor For cutter motor For logic Dimensions Mechanism with cutter Interface board Mechanism with cutter Interface board Head Cutter Platen Operating temperature* Operating humidity Operating environment Storage temperature Storage humidity Head temperature detection Detection function Paper out/mark detection Platen release Movable blade Specification Conforms to RS232C / Centronics 4.2 - 8.5 VDC average current, 1.8 (2.4)A at 7.2V (print ratio: 12.5%, print speed: 60mm/sec. ) 4.2 - 8.5 VDC, 1A maximum 4.75 - 8.5 VDC, 1A maximum 5 VDC 5%, 0.1 A maximum 81.2 x 42.2 x 21.8 mm (WxDxH) 70 x 60 x12 mm Approximately 97g Approximately 25g Pulse resistance: 100 million pulses/dot (under our standard conditions); Abrasion resistance: paper traveling distance 50km (print ratio: 12.5% or less) 500,000 cuts 5,000 times (open/close) 0 C to 50 C 20 to 85% RH (no condensation) -20 C to +60 C (paper not included) 5 to 95% RH (no condensation) Detected by thermistor Detected by photo-interrupter Detected by sliding switch Detected by photo-interrupter High Sensitive Paper Standard paper: TF50KS-E4 (Nippon Paper) TF60KS-E(Nippon Paper), FTP020PU001 (58mm), PD105R (Oji Paper), FTP-020P0701 (58mm) TF60KS-F1, FTP-020P0102 (58mm), PD170R (Oji Paper), P220VBB-1 Mitsubishi Paper) PD160R-N (Oji Paper), AFP-235 (Mitsubishi Paper), TP50KJ-R (Nippon Paper), HA220AA (Nippon Paper)
Weight
Life
Recommended thermal sensitive paper
Medium Life Paper
Long Life Paper
*+5C to +40C printing density assurance rance (-25 to 70C capability)
3
FTP-628MCL401/451
n FuNCTiONOFiNTerFaCebOard
Item . 2. 3. 4. 5. 6. 7. Test print function Paper out detection Paper near end detection Platen open detection Thermal head temperature abnormality detection Blow-out fuse detection Head voltage abnormality detection 8. 9. 0. . 2. 3. 4. Item Cutter trouble detect Motor power saving function Mark detection function MCU operation abnormality detection Power ON/OFF sequence protection Motor over-current protection Hardware timer
n diMeNsiONs
1.Printermechanism FTP-628MCL40
printer
3.9
7.5 cutting position
(54)
printer position standard
42.2
3.
5.4
platen center
paper exhaust position
pa
pe
platen unit 8.2 10.7 2.8
lever
r
platen unit
Note: 1. Dimensions are nominal value (tolerance 5 unless otherwise specified). 2. Platen unit (lever, platen, etc) moves by approximately 0.7mm toward paper insertion direction when platen is open.
Unit: mm
4
FTP-628MCL401/451
1.Printermechanism FTP-628MCL45
5
FTP-628MCL401/451
2.Interfaceboard
(70.0) 3.25 50.5 25.5
3.25 .0
63.5
3.25
.45 30 CN3
CN8 2
CN4 8
(60.0)
53.5
CN 30
42.0
FGO3.2
3.25 .2
3-O3.2
3.5
CN7 CN2 6 8
2
3.25
17.5 49.5
.25
Mounting height Mounting height
.6
3
7
Note: . The size with parentheses is a reference value. 2. Part mounting height is maximum.
Unit:mm
45.5
29
6
FTP-628MCL401/451
FTP-628MCL401mechanism/cutterFPCPINAssignment
() For thermal head, motor and sensor Connector on control circuit: 5260-3090 (Molex or equivalent) No 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 36 27 28 29 30 PH K VSE N PH E VH VH DI CL K GN D GN D STB 6 STB 5 STB 4 Vd d TM TM STB 3 STB 2 STB 1 GN D GN D LA T DO VH VH SW SW MT/ A MT/ A MT/ B MT/ B Signa l Content s Cathode for photo interrupto r paper sensor powe r Emittor for photo interrupto r Head drive power Data i n Cloc k Head ground Strobe 6 Strobe 5 Strobe 4 Logic powe r Thermistor Strobe 3 Strobe 2 Strobe 1 Head ground Data latc h Data ou t Head drive power Platen release switch Excitation signal A Excitation signal A Excitation signal B Excitation signal B
7
FTP-628MCL401/451
FTP-628MCL451mechanism/platenbracketFPCPINAssignment
() For thermal head, motor and sensor Connector on control circuit: 5260-3090 (Molex or equivalent) No 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 36 27 28 29 30 PH K VSE N PH E VH VH DI CL K GN D GN D STB 6 STB 5 STB 4 Vd d TM TM STB 3 STB 2 STB 1 GN D GN D LA T DO VH VH SW SW MT/ A MT/ A MT/ B MT/ B Signa l Content s Cathode for photo interrupto r paper sensor powe r Emittor for photo interrupto r Head drive power Data i n Cloc k Head ground Strobe 6 Strobe 5 Strobe 4 Logic powe r Thermistor Strobe 3 Strobe 2 Strobe 1 Head ground Data latc h Data ou t Head drive power Platen release switch Excitation signal A Excitation signal A Excitation signal B Excitation signal B
8
FTP-628MCL401/451
(2) For cutter Connector on control circuit: 5260-0890 (Molex or equivalent) No 1 2 3 4 5 6 7 8 VSE N PH E PH K MT/ A MT/ A MT/ B MT/ B NC Signa l Content s Home position sensor powe r Emittor for photo interrupto r Cathode for photo interrupto r Excitation signal A Excitation signal A Excitation signal B Excitation signal B Not connecte d Sensor (Photointerruptor) Platen unit Thermal head Motor
Connector No (FPC pin
30,29,
FPC Connect terminal: surface side
FujitsuComponentsInternationalHeadquarterOffices
Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 4, Japan Tel: (81-3) 5449-7010 Fax: (8-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com NorthandSouthAmerica Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: components@us.fujitsu.com Web: http://us.fujitsu.com/components/ Europe Fujitsu Components Europe B.V. Diamantlaan 25 232 WV Hoofddorp, The Netherlands Tel: (3-23) 556090 Fax: (3-23) 5560950 Email: info@fceu.fujitsu.com Web: emea.fujitsu.com/components/ AsiaPacific Fujitsu Components Asia Ltd. 02E Pasir Panjang Road #0-0 Citilink Warehouse Complex Singapore 8529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com Web: http://www.fujitsu.com/sg/services/micro/components/
(c)2007 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. August 17, 2007
9

▲Up To Search▲

Price & Availability of 628MCL451

	To Download 628MCL451 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .